For use with gases and steam above 25 bar. A solid baffle wall, blow-out back and safety glass or perspex windows are used to direct escaping pressure out of the back of the gauge to prevent operator injury in the event of a gauge failure. Surface mounted gauges should use mounting extensions no shorter than 20mm to allow for correct operation of the safety design.

These instruments are built to special order to customer specification. Please contact us for further information or quotation.

Oxygen under pressure when in contact with oil or grease can lead to a high risk of explosion. It is imperative that extreme care is always taken in the manufacture, testing and installation of oxygen gauges to avoid any oil contamination. Oxygen gauges must be of the safety pattern type and have Oxygen and Use No Oil symbol printed clearly on the dial.

These instruments are built to special order to customer specification. Please contact us for further information or quotation.

Acetylene when in contact with high copper or silver content alloy may form an explosion risk. All parts of the gauge in contact with acetylene should be steel or 65% maximum copper content alloy. Acetylene gauges must be of the safety pattern type and have Acetylene printed clearly on the dial.

These instruments are built to special order to customer specification. Please contact us for further information or quotation.

For use in mining applications where any component containing aluminium could be hazardous.

These instruments are built to special order to customer specification. Please contact us for further information or quotation.